https://forums.autodesk.com/t5/fusion-manufacture-forum/g-code-g0-runs-under-the-material/m-p/6763999#M144385 <P>Hi there,</P><P>&nbsp;</P><P>I'm working on using Fusion 360 to create my drawings and gcode but I'm noticing that when I load the g-code to mach 3 the cnc wants to run under the material to get to the origin point of the project.?. Why doe this happen? I have followed the G-code and it seems like the machine moves there while trying to run gO for rapid positioning. Any ideas?</P><P>&nbsp;</P><P>Thanks</P> Wed, 21 Dec 2016 19:13:02 GMT Anonymous 2016-12-21T19:13:02Z https://forums.autodesk.com/t5/fusion-manufacture-forum/g-code-g0-runs-under-the-material/m-p/6763999#M144385 <P>Hi there,</P><P>&nbsp;</P><P>I'm working on using Fusion 360 to create my drawings and gcode but I'm noticing that when I load the g-code to mach 3 the cnc wants to run under the material to get to the origin point of the project.?. Why doe this happen? I have followed the G-code and it seems like the machine moves there while trying to run gO for rapid positioning. Any ideas?</P><P>&nbsp;</P><P>Thanks</P> Wed, 21 Dec 2016 19:13:02 GMT https://forums.autodesk.com/t5/fusion-manufacture-forum/g-code-g0-runs-under-the-material/m-p/6763999#M144385 Anonymous 2016-12-21T19:13:02Z https://forums.autodesk.com/t5/fusion-manufacture-forum/g-code-g0-runs-under-the-material/m-p/6764078#M144386 <P>I've found other threads that are commenting on this so I've moved to them for awnsers.</P><P>&nbsp;</P><P><A href="https://forums.autodesk.com/t5/computer-aided-machining-cam/constant-issue-i-m-having-with-toolpaths/td-p/5948386" target="_blank">https://forums.autodesk.com/t5/computer-aided-machining-cam/constant-issue-i-m-having-with-toolpaths/td-p/5948386</A></P> Wed, 21 Dec 2016 19:39:54 GMT https://forums.autodesk.com/t5/fusion-manufacture-forum/g-code-g0-runs-under-the-material/m-p/6764078#M144386 Anonymous 2016-12-21T19:39:54Z