topic Re: Does Fusion have a Post Processor for ROMI D1000 - Fanuc OI-MD Command? in Fusion Manufacture Forum

Does Fusion have a Post Processor for ROMI D1000 - Fanuc OI-MD Command?

nathan.silvaFFVMS — Fri, 24 May 2024 20:03:09 GMT

Hello Autodesk team. Good afternoon. I hope you are well.

I would like to know if Autodesk Fusion has the Post Processor for ROMI D1000 - Fanuc OI-MD Command?

If Fusion does not have this post processor in its post processor library, I would like to know if it is possible to install this post processor in Fusion?

I'm waiting for a return.

Thank you, sincerely!

Re: Does Fusion have a Post Processor for ROMI D1000 - Fanuc OI-MD Command?

boopathi.sivakumar — Tue, 28 May 2024 14:19:56 GMT

Hi @nathan.silvaFFVMS

I have taken a qucik look into the programming manul of romi machine it seems like our generic fanuc can handle most of it seems. Pls try out the fanuc post in our library

Re: Does Fusion have a Post Processor for ROMI D1000 - Fanuc OI-MD Command?

possamai.cadcam — Tue, 28 May 2024 18:27:03 GMT

O pós genérico já funciona muito bem, só tem que fazer alguns ajustes como códigos M ou coisas específicas que você queira.

The generic post works fine out of the box, maybe you'll need to change some M codes or specific things that you may want.