topic 2D Contour + Rest + Corner Radius = Wrong area detection in Fusion Manufacture Forum

2D Contour + Rest + Corner Radius = Wrong area detection

CAMXPRESS — Tue, 26 Sep 2017 14:30:31 GMT

Hi All,

If I make a 2D Contour path with Rest Machining and with Corner Radius the rest area detection always wrong.

The contour goes all of the contours and does not cut it to the right rest area. However, it working well without the

Corner radius.

Thanks for the help in advanced.

BassLine

Re: 2D Contour + Rest + Corner Radius = Wrong area detection

Matthew-R — Tue, 26 Sep 2017 16:17:04 GMT

Hello @CAMXPRESS and thank you for posting to the Fusion 360 CAM forum. Have you tried modifying the tolerance in your operation? Try making it tighter, to something like .001. Also, if you can, please upload your Fusion file and we can have a closer look. Thanks!

Re: 2D Contour + Rest + Corner Radius = Wrong area detection

CAMXPRESS — Wed, 27 Sep 2017 08:08:23 GMT

Hello Matthew,

It is independent about the tolerances. Here is the little project.

Regards,

Joe

Re: 2D Contour + Rest + Corner Radius = Wrong area detection

kjaersn — Thu, 28 Sep 2017 14:08:31 GMT

Hi @CAMXPRESS,

Thank you for your feedback. It seems to be an issue in the generation and it's logged in CAM-8549.

/Niels

Re: 2D Contour + Rest + Corner Radius = Wrong area detection

CAMXPRESS — Fri, 29 Sep 2017 08:32:48 GMT

Hello Niels,

Thank you for the help about it.

Regards,

Joe

Re: 2D Contour + Rest + Corner Radius = Wrong area detection

pavel_viktorin — Tue, 30 Apr 2024 07:39:15 GMT

Hi, is there any solution to this problem? It seems the problem still exists after years.