topic Re: Fanuc Inspection Connector in Fusion Manufacture Forum

Fanuc Inspection Connector

alexmagnetti — Thu, 30 May 2024 07:06:42 GMT

Is any Fanuc or Heidenhain Inspection Connector available ?

Thank you

Re: Fanuc Inspection Connector

a.laasW8M6T — Thu, 30 May 2024 07:23:28 GMT

There is now one For Heidenhain, Siemens and Fanuc, You must add the Machine connector capability to the Machine definition:

Then you can pick it here

I'm not Familiar with Fanuc but the Heidenhain uses DCOM which is only available on the TNC640/620 as an option(18), and some newer iTNC530(and TNC7 but there's not many of those around yet)

@Richard.stubley may be able to give some more info these

Re: Fanuc Inspection Connector

alexmagnetti — Wed, 05 Jun 2024 07:14:44 GMT

Super thank you !

Re: Fanuc Inspection Connector

da_fish — Wed, 17 Jul 2024 14:54:20 GMT

Do I need to download a connector?

Re: Fanuc Inspection Connector

da_fish — Wed, 17 Jul 2024 14:51:41 GMT

I left the "Machine Connector Path" blank and when I tried running it, it gave the following error:

Where can I get the connector? I couldn't find one on the machine library. I'm running a Fanuc RoboDrill.

Re: Fanuc Inspection Connector

a.laasW8M6T — Thu, 18 Jul 2024 01:07:12 GMT

I'm not sure TBH

There only appears to be a Machine connector application for HAAS controls.

I don't have a Fanuc controller so cannot test this.

@seth.madore Do you know where the machine connector apps are for the other controls? Fanuc Heidenhain Seimens?

Or are they not actually need for those controls?

Re: Fanuc Inspection Connector

seth.madore — Thu, 18 Jul 2024 14:38:22 GMT

Oh, they're very much needed. It does appear that we haven't yet released them to the public. Let me check in with some folks who might know what the status is on them 🤔

Re: Fanuc Inspection Connector

roland.bennerJLJT8 — Fri, 18 Oct 2024 09:52:21 GMT

Hi Seth,
are there any news to machine connector for Heidenhain or Siemens control?
Greetings Roland

Re: Fanuc Inspection Connector

AWFmatt — Tue, 31 Dec 2024 20:43:27 GMT

@seth.madore

Is there any update to this?

Thanks!

Re: Fanuc Inspection Connector

seth.madore — Tue, 07 Jan 2025 21:05:49 GMT

So, it appears that we have:

Fanuc Machine Connector available here:

https://cam.autodesk.com/hsmposts?p=fanuc_inspection

Heidenhein is here:

https://cam.autodesk.com/hsmposts?p=heidenhain_inspection

I'm not sure where we're up to for the Siemens, let me check in with some folk and get back to you on that..

Re: Fanuc Inspection Connector

seth.madore — Thu, 09 Jan 2025 11:08:34 GMT

@AWFmatt @roland.bennerJLJT8 do either of you have a Siemens control with the RPC (Remote Procedure Call) option installed?

Re: Fanuc Inspection Connector

roland.bennerJLJT8 — Thu, 09 Jan 2025 12:07:51 GMT

...no I don't have RPC option for Siemens.

Re: Fanuc Inspection Connector

AWFmatt — Thu, 09 Jan 2025 14:42:03 GMT

I do not.