topic Re: Cam wcs ortographic view in Fusion Manufacture Forum

Cam wcs ortographic view

Anonymous — Wed, 14 Feb 2018 18:40:56 GMT

Hi all
Sometime the cam wcs needs a different angle respect the part origin. There is the possibility to set the ortographic view respect cam wcs instead part origin?

Re: Cam wcs ortographic view

Matthew-R — Thu, 15 Feb 2018 16:36:04 GMT

@Anonymous Thanks for posting your question to the Fusion 360 forum.

You can always reset the home view in Fusion 360 to be in any position that you would like, so that you can quickly get back to that view. Have a look at this article and let me know if this helps and answers your question. Thanks again!

How to change the default position for Home view in Fusion 360

Re: Cam wcs ortographic view

Matthew-R — Sat, 17 Feb 2018 00:10:24 GMT

@Anonymous Was the article helpful? Did that accomplish what you were after? Thanks!

Re: Cam wcs ortographic view

Anonymous — Sat, 17 Feb 2018 06:47:33 GMT

Yes the article is helpful! With this I can solve my problem