topic Re: Chamfer operation is way out of place when post processing. in Fusion Manufacture Forum

Chamfer operation is way out of place when post processing.

justo_urbina12 — Tue, 26 Jun 2018 23:44:53 GMT

Hello guys, i have encountered an issue with 2d chamfer operation. Everything looks good when simulation, however when i post process it and open it in woodwop 5.0 the chamfer operation is way out of way.

Re: Chamfer operation is way out of place when post processing.

justo_urbina12 — Wed, 27 Jun 2018 00:14:40 GMT

Here is another screencast with a different model and it seems like the issue is with circles, perhaps i am doing something wrong, can someone help me?

Re: Chamfer operation is way out of place when post processing.

Steinwerks — Wed, 27 Jun 2018 00:45:05 GMT

Can you share that code here possibly? If the forum doesn't let you attach it in a native format (this seems to happen with a lot of extension), changing the extension to .NC should work fine. I suspect this is actually a control setting, and seems to be common with at least Mach3 as well.

Re: Chamfer operation is way out of place when post processing.

justo_urbina12 — Wed, 27 Jun 2018 00:53:28 GMT

Here it is.

Re: Chamfer operation is way out of place when post processing.

justo_urbina12 — Wed, 27 Jun 2018 00:56:27 GMT

Here are 2 parts i made on the machine, 1 with chamfer on the circles and the other without.

Re: Chamfer operation is way out of place when post processing.

Steinwerks — Wed, 27 Jun 2018 01:02:18 GMT

I was hoping to backplot this but it's in a format that I am completely unfamiliar with. Can you attach your post processor? I have a suspicion that it is creating 360° arcs and that your control doesn't like that.

Re: Chamfer operation is way out of place when post processing.

justo_urbina12 — Wed, 27 Jun 2018 01:07:48 GMT

Okay there you go.

Re: Chamfer operation is way out of place when post processing.

Steinwerks — Wed, 27 Jun 2018 01:12:33 GMT

Well it appears this was already accounted for by the developers!

image.png

I have attached this with a small edit to change the 180° limit to 120° on the off-chance that it could help. Can you post your file and run a simulation on the control to see if this helps?

Re: Chamfer operation is way out of place when post processing.

justo_urbina12 — Wed, 27 Jun 2018 01:37:23 GMT

Hahaha, heck yeah it worked. Thank you very much, now it's time to make some sawdust again.

Re: Chamfer operation is way out of place when post processing.

Steinwerks — Wed, 27 Jun 2018 01:40:07 GMT

Glad to hear it! Have fun!