topic Re: Rectangular hole in Fusion Manufacture Forum

Rectangular hole

leoE4H8W — Wed, 26 Jun 2024 18:03:07 GMT

I can's get the bottom hole cut, the pockets are good.

Re: Rectangular hole

programming2C78B — Wed, 26 Jun 2024 18:08:05 GMT

We will need...some information. You already had a thread open about this.

Re: Rectangular hole

leoE4H8W — Wed, 26 Jun 2024 18:10:39 GMT

I still haven't gotten it right, please explane again

Re: Rectangular hole

leoE4H8W — Wed, 26 Jun 2024 18:23:07 GMT

Here's the file

Re: Rectangular hole

leoE4H8W — Wed, 26 Jun 2024 18:26:42 GMT

Here;s the file

Re: Rectangular hole

programming2C78B — Thu, 27 Jun 2024 13:09:03 GMT

You are using 2d adaptive with the wrong geometry selected, and the depth is too shallow to include the pocket itself.

Adaptive is usually done with a much larger DOC as well, usually 2x the tool diameter.

It's also .328 wide and your tool is .313, so all leads and stock adjustments must equal less then .015". Use 2D contour with ramp.

Re: Rectangular hole

leoE4H8W — Fri, 28 Jun 2024 12:18:07 GMT

The x is the pocket and the blue in the hole i want to cut.

Re: Rectangular hole

programming2C78B — Fri, 28 Jun 2024 12:19:51 GMT

yes, im aware of that. None of that changes what I said.

Re: Rectangular hole

leoE4H8W — Fri, 28 Jun 2024 20:51:13 GMT

I got it, but this is what I get now.