https://forums.autodesk.com/t5/fusion-manufacture-forum/stock-from-solid-not-working-with-3d-adaptive-tool-patch/m-p/8225777#M117448 <P>@Anonymous&nbsp;I think this is what you're looking for.&nbsp; I've attached a file with the edits that I made.&nbsp; I split it into two separate operations.&nbsp; One to remove the bulk of the remaining rectangle at the top (I simply adjusted the bottom height of the tool path to stop just below there.&nbsp; Then I went back into sketch and created projections of the ends of the forks and used those projections to drive the rest of the adaptive tool path on the forks (Again using the heights tab to start at the height I left off at on the previous operation and cutting down to halfway on the forks to the point where the model begins to undercut.&nbsp; You may have to play around with it a little as I did it pretty quick and just approximated the heights and projections.</P><P>&nbsp;</P><P>Hope that helps!</P><P>&nbsp;</P><P>P.S. Someone else may have a much easier and cleaner way to do this but this is how I would go about it! &nbsp;</P><P>&nbsp;</P><P>Jeff Murphy&nbsp;</P> Mon, 27 Aug 2018 00:39:09 GMT halfmoonmods 2018-08-27T00:39:09Z https://forums.autodesk.com/t5/fusion-manufacture-forum/stock-from-solid-not-working-with-3d-adaptive-tool-patch/m-p/8225719#M117447 <P>Hi&nbsp;</P><P>&nbsp;</P><P>Im having trouble with using a stock from solid for the second operation or a part I'm making ive drawn the stock but it doesn't seem to have any effect on the tool path, it still goes ahead and machines away material that isn't there??</P><P>&nbsp;</P><P>id love some help on this, I can't find a way of getting around the problem...</P><P>&nbsp;</P><P>many thanks</P> Sun, 26 Aug 2018 23:25:02 GMT https://forums.autodesk.com/t5/fusion-manufacture-forum/stock-from-solid-not-working-with-3d-adaptive-tool-patch/m-p/8225719#M117447 Anonymous 2018-08-26T23:25:02Z https://forums.autodesk.com/t5/fusion-manufacture-forum/stock-from-solid-not-working-with-3d-adaptive-tool-patch/m-p/8225777#M117448 <P>@Anonymous&nbsp;I think this is what you're looking for.&nbsp; I've attached a file with the edits that I made.&nbsp; I split it into two separate operations.&nbsp; One to remove the bulk of the remaining rectangle at the top (I simply adjusted the bottom height of the tool path to stop just below there.&nbsp; Then I went back into sketch and created projections of the ends of the forks and used those projections to drive the rest of the adaptive tool path on the forks (Again using the heights tab to start at the height I left off at on the previous operation and cutting down to halfway on the forks to the point where the model begins to undercut.&nbsp; You may have to play around with it a little as I did it pretty quick and just approximated the heights and projections.</P><P>&nbsp;</P><P>Hope that helps!</P><P>&nbsp;</P><P>P.S. Someone else may have a much easier and cleaner way to do this but this is how I would go about it! &nbsp;</P><P>&nbsp;</P><P>Jeff Murphy&nbsp;</P> Mon, 27 Aug 2018 00:39:09 GMT https://forums.autodesk.com/t5/fusion-manufacture-forum/stock-from-solid-not-working-with-3d-adaptive-tool-patch/m-p/8225777#M117448 halfmoonmods 2018-08-27T00:39:09Z