2D Adaptive Clearing Helix Ramp Type

jparamo4546 — Tue, 11 Sep 2018 23:43:43 GMT

Using 2D adaptive along with the Helix Ramp option. The router would move to the center of the selected circle to be carved and start doing its helical movements BUT it will also offset its center of rotation which ends up cutting the actual circle not where designed. If I change to Plunge, the circle is cut at the location according to design. The simulation of the operation with Helix shows everything perfect. It shows it around the center of the circle to be carve but the machine does something completely different

The 2D adaptive is an operation I used multiple times and even have it in my templates. I just loaded into my new design and changed to a new geometry.

Any guidance would be appreciated

Re: 2D Adaptive Clearing Helix Ramp Type

chris — Wed, 12 Sep 2018 21:37:54 GMT

Interesting. I know it says Adaptive Clearing but it looks more like a 2D pocket with Helix Ramp. Outside of that it looks good. have you been able to correct it?

topic Re: 2D Adaptive Clearing Helix Ramp Type in Fusion Manufacture Forum

2D Adaptive Clearing Helix Ramp Type

Re: 2D Adaptive Clearing Helix Ramp Type