topic Re: Machining a cutting board issue. in Fusion Manufacture Forum

Machining a cutting board issue.

custombuilt15 — Sun, 28 Oct 2018 04:49:29 GMT

Hi all

I made a cutting board by creating multiple boards as individual components, I then jointed them together using joints. When I try to set up a contour to cut around the outside of the entire cutting board Fusion sees multiple boards and will not allow me to select the entire outside edge. Am I missing a setting somewhere or should I not have made it using individual components? Any help would be great!

Re: Machining a cutting board issue.

daniel_lyall — Sun, 28 Oct 2018 09:53:55 GMT

Normally just selecting all components in the setup is enough, can you post the model To do this Go to File -> Export and save as a .F3D Archive File and attach it to your next post

Re: Machining a cutting board issue.

custombuilt15 — Sun, 28 Oct 2018 14:32:37 GMT

That's what I thought as well but I am still very new to this. Here is the file. Thank you very much for taking a look.

Re: Machining a cutting board issue.

daniel_lyall — Mon, 29 Oct 2018 02:11:00 GMT

There were 2 bodies missing from the model selection.

The spot where it has gone is not knowing the proper way to select the cut path Have a look at this video https://www.youtube.com/watch?v=ATs4rsI_TPc&t=11s

This has in it what to do please watch it.

Re: Machining a cutting board issue.

custombuilt15 — Tue, 30 Oct 2018 12:40:16 GMT

Thanks Daniel!! The contour selection was the issue.