topic Re: TRACE TOOLPATH in Fusion Manufacture Forum

TRACE TOOLPATH

neemplastmould2026 — Thu, 25 Jul 2024 14:16:45 GMT

CAN YOU ADD MULTIPLE FINISHING PASSES IN TRACE PLEASE

Re: TRACE TOOLPATH

Andrew_Todd — Thu, 25 Jul 2024 14:33:29 GMT

Hi Thanks for the feedback. Do you mean similar to some of our other finish tool paths? I think maybe this feature is already there?

Re: TRACE TOOLPATH

weber_dominic — Thu, 25 Jul 2024 14:28:26 GMT

Yes you can check the Multiple Passes box.

Re: TRACE TOOLPATH

Andrew_Todd — Thu, 25 Jul 2024 14:52:48 GMT

We are still testing 'multiple passes' in Trace on an 'Insider' Feature Flag. Hopefully this will be ready for full release at some stage soon.

Re: TRACE TOOLPATH

TimMartin. — Thu, 25 Jul 2024 19:01:47 GMT

Right click on toolpath, click duplicate. You can add as many passes as you want this way. Use stock to leave if you want to change stepover amount. Your sideways compensation has to be set to left or right in the passes tab.

Re: TRACE TOOLPATH

neemplastmould2026 — Fri, 26 Jul 2024 09:56:23 GMT

WELL ITS VERY COMMON FEATURE IN OTHER SOFTWARE AND AUTODESK FUSION IS STILL WORKING ON IT
I AM CREATING THIS TOOLPATH IN MASTERCAM X5 2010 SOFTWARE
PLEASE UPDATE THIS FEATURE IT WILL HELP ME ALOT

Re: TRACE TOOLPATH

neemplastmould2026 — Fri, 26 Jul 2024 09:57:07 GMT

THEN I HAVE TO CREATE 40-50 PROGRAMME

Re: TRACE TOOLPATH

neemplastmould2026 — Fri, 26 Jul 2024 09:58:00 GMT

NOT SHOWING IN MY FUSION 360 HOW ?

Re: TRACE TOOLPATH

neemplastmould2026 — Fri, 26 Jul 2024 09:58:34 GMT

TELL ME WHERE ?

Re: TRACE TOOLPATH

Andrew_Todd — Fri, 26 Jul 2024 10:15:33 GMT

Hi. Are you signed up to the insider program? If no then this feature will not be available to you at this time. I have inquired with the development guys and this feature will be available in a future update . Thanks.

Re: TRACE TOOLPATH

seth.madore — Fri, 26 Jul 2024 10:11:02 GMT

@neemplastmould2026 wrote:
TELL ME WHERE ?

You need to be a member of the Insider Program to access that feature. Membership is free, but it does involve an application process. You can apply here: https://feedback.autodesk.com/key/Fusion360Insider

Re: TRACE TOOLPATH

neemplastmould2026 — Fri, 26 Jul 2024 11:12:10 GMT

can i add multiple body stocks in manufacture ?

Re: TRACE TOOLPATH

seth.madore — Fri, 26 Jul 2024 11:21:23 GMT

@neemplastmould2026 wrote:
can i add multiple body stocks in manufacture ?

It would be helpful to know what your goal and expectation is?

Re: TRACE TOOLPATH

neemplastmould2026 — Fri, 26 Jul 2024 11:24:19 GMT

I AM A PLASTIC INJECTION MOLD MAKER SO THERE ARE MULTICAVITES AND PUNCHES TO MACHINE

Re: TRACE TOOLPATH

neemplastmould2026 — Fri, 26 Jul 2024 11:24:54 GMT

AMD YEAH I INSTALL FUSION INSIDER STILL ITS NOT SHOWING

Re: TRACE TOOLPATH

seth.madore — Fri, 26 Jul 2024 11:31:11 GMT

@neemplastmould2026 wrote:

I AM A PLASTIC INJECTION MOLD MAKER SO THERE ARE MULTICAVITES AND PUNCHES TO MACHINE

This is a separate question from the Trace issue you raised at the beginning of this thread

I recommend taking this new question into a new thread.

@neemplastmould2026 wrote:

AMD YEAH I INSTALL FUSION INSIDER STILL ITS NOT SHOWING

It is a Preference:

Re: TRACE TOOLPATH

neemplastmould2026 — Fri, 26 Jul 2024 11:47:44 GMT

well it still not showing

Re: TRACE TOOLPATH

seth.madore — Fri, 26 Jul 2024 12:10:52 GMT

Did you apply for the Insider just this morning or have you been a member for a while?

Re: TRACE TOOLPATH

neemplastmould2026 — Fri, 26 Jul 2024 12:12:19 GMT

i just deed an hour ago

Re: TRACE TOOLPATH

seth.madore — Fri, 26 Jul 2024 12:32:45 GMT

It's likely that you actually don't have access yet. The application and approval is entirely manual (there's a human being that reads and approves/denies the application)