topic Fusion turn Groove suppression does not work in Fusion Manufacture Forum

Fusion turn Groove suppression does not work

marcus.toepke — Sun, 11 Aug 2024 08:13:31 GMT

Hi all!

I have created an exercise part for turning. Nothing wild!
When I try to use groove suppression, Fusion calculates forever and stays at 0%

I know how to get round the problem, set the rear boundary differently or 100 other possibilities. But I'm interested in why it doesn't work, what am I doing wrong?

I tip on a E70 Error, but I can't find it!

Betreff: Fusion turn Groove suppression does not work

Christoph_360 — Sun, 11 Aug 2024 12:30:35 GMT

Hello

If you only select one face of the groove, it works, but I myself have too little experience in turning to explain the relationships.

(view in My Videos)

Mfg

Christoph

Betreff: Fusion turn Groove suppression does not work

marcus.toepke — Sun, 11 Aug 2024 14:15:34 GMT

That's funny!
That's exactly what I tried!

I've just tried it again and it doesn't work for me!

(view in My Videos)

Re: Fusion turn Groove suppression does not work

Andrew_Todd — Mon, 12 Aug 2024 08:11:12 GMT

Hi Guys. This could be a possible bug. I will look into this now for you and report back. Thanks.

Re: Fusion turn Groove suppression does not work

Andrew_Todd — Mon, 12 Aug 2024 14:21:45 GMT

@marcus.toepke- Just for your FYI when I generated the tool path at my end it calculated fine using the parameters you specified.

Re: Fusion turn Groove suppression does not work

akash.kamoolkar — Mon, 12 Aug 2024 14:30:56 GMT

@marcus.toepke I cannot replicate this issue in the latest update of Fusion that recently went out. Could you check again, after updating your Fusion?

Regards,

Re: Fusion turn Groove suppression does not work

marcus.toepke — Mon, 12 Aug 2024 17:13:38 GMT

OK I have used the repair function.
After that NOTHING it don't worked.

Then I copied the sketch and build the solid to manufacture new.

Now it works but I must select the full groove.

Then I build a Very simple model with two groves

If I select only the buttom of the groove:

If I select the full groove:

Re: Fusion turn Groove suppression does not work

kuhnjst — Tue, 13 Aug 2024 12:59:10 GMT

I have also been having a lot of problems with this. It used to work then it didn't and hasn't for some time now(months). I have installed all of the updates in normal Fusion and the Insider and it still doesn't work.

Re: Fusion turn Groove suppression does not work

akash.kamoolkar — Thu, 22 Aug 2024 17:05:57 GMT

@marcus.toepke I'm not sure I understand the issue. Yes, you have to select the walls and the floor of the groove for Fusion to recognize the groove. This is by design.

Regards,

Re: Fusion turn Groove suppression does not work

akash.kamoolkar — Thu, 22 Aug 2024 17:06:39 GMT

@kuhnjst Could you attach a sample file that used to work with groove suppression enabled and now doesn't?

Regards,

Re: Fusion turn Groove suppression does not work

kuhnjst — Thu, 22 Aug 2024 17:15:33 GMT

I never had a file that did, then didn't, work. I had 1 file that did. The 1st time I used groove suppression it worked (no longer have that file. IT was when I 1st installed Fusion So just over a year ago.) Then any time after that, when I tried to use groove suppression, it didn't work.

Re: Fusion turn Groove suppression does not work

akash.kamoolkar — Thu, 22 Aug 2024 17:24:33 GMT

@kuhnjst if you have a file that doesnt work with groove suppression, any file, i'll be glad to take a look.

Regards,

Re: Fusion turn Groove suppression does not work

kuhnjst — Thu, 22 Aug 2024 17:28:18 GMT

i cant post anything on the public forum. I can submit a ticket through Autodesk and attach your name to it?

Re: Fusion turn Groove suppression does not work

akash.kamoolkar — Thu, 22 Aug 2024 17:30:35 GMT

@kuhnjst you can either send me a private message or email me at akash dot kamoolkar at autodesk dot com.

Regards,

Re: Fusion turn Groove suppression does not work

kuhnjst — Thu, 22 Aug 2024 17:37:32 GMT

I can only submit models/projects to Autodesk customer support due to NDA requirements.

Re: Fusion turn Groove suppression does not work

akash.kamoolkar — Thu, 22 Aug 2024 17:41:10 GMT

@kuhnjst yeah you can send it to support then, requesting them to forward it to me and i'll take a look.

Regards,

Re: Fusion turn Groove suppression does not work

akash.kamoolkar — Thu, 05 Sep 2024 18:23:43 GMT

@kuhnjst Thanks for sending over your file, I have verified that the groove suppression problem you reported has been fixed in an upcoming update. I will update this thread when it is released to the public.

Regards,