şuradaki Re: lazer tool sorunu konusu: Fusion – Türkçe Forum

lazer tool sorunu

yakupyildizeli — Thu, 21 Jan 2021 19:23:49 GMT

Silindirik parçaya ekte görüldüğü gibi multi axis ile çizgisel lazer yakma yapmak istiyorum fakat ekteki sorunla karşılaşıyorum.

Re: lazer tool sorunu

jhackney1972 — Fri, 22 Jan 2021 00:30:42 GMT

To use a Laser Tool you must have declared it to be a Cutting operation in the Setup file. Even then I am not sure you can do a laser path on a round object because a Cutting routine is 2D. @seth.madore is the one to tell us if this is possible and if so, how to do it.

Re: lazer tool sorunu

seth.madore — Fri, 22 Jan 2021 01:20:45 GMT

That is correct, 2D Cutting is....2D only. You could in theory just program a 2D Trace toolpath and just delete the spindle speed codes

Ynt: lazer tool sorunu

seth.madore — Fri, 22 Jan 2021 10:50:07 GMT

Slight correction: It occured to me late last night that 2D Trace doesn't support Wrapped geometry. You would actually need to use 2D Contour, turn off your lead-in/out and set it to "Computer Compensation"