topic PCB Thickness is incorrect based on the Eagle DRC Layer settings in Fusion Electronics Forum https://forums.autodesk.com/t5/fusion-electronics-forum/pcb-thickness-is-incorrect-based-on-the-eagle-drc-layer-settings/m-p/11218178#M9093 <P>the Fusion PCB Thickness is incorrect based on the Eagle DRC Layer settings.&nbsp; I have followed the recommended workaround (setting it to 2-Layer and then back again to 8-Layer and Pushing again, and updating Fusion to the newest revision).&nbsp; That did not work and the board is 5.534mm instead of the DRC thickness of 1.6mm.</P><P>&nbsp;</P><P>The previous versions of the board worked fine (before May 2022).&nbsp; The board DRC settings have not changed.</P><P>&nbsp;</P><P>Does anyone know a fix?&nbsp; Seems like some bug in a release that happened sometime in May 2022.</P> Tue, 07 Jun 2022 00:51:01 GMT websterdav 2022-06-07T00:51:01Z PCB Thickness is incorrect based on the Eagle DRC Layer settings https://forums.autodesk.com/t5/fusion-electronics-forum/pcb-thickness-is-incorrect-based-on-the-eagle-drc-layer-settings/m-p/11218178#M9093 <P>the Fusion PCB Thickness is incorrect based on the Eagle DRC Layer settings.&nbsp; I have followed the recommended workaround (setting it to 2-Layer and then back again to 8-Layer and Pushing again, and updating Fusion to the newest revision).&nbsp; That did not work and the board is 5.534mm instead of the DRC thickness of 1.6mm.</P><P>&nbsp;</P><P>The previous versions of the board worked fine (before May 2022).&nbsp; The board DRC settings have not changed.</P><P>&nbsp;</P><P>Does anyone know a fix?&nbsp; Seems like some bug in a release that happened sometime in May 2022.</P> Tue, 07 Jun 2022 00:51:01 GMT https://forums.autodesk.com/t5/fusion-electronics-forum/pcb-thickness-is-incorrect-based-on-the-eagle-drc-layer-settings/m-p/11218178#M9093 websterdav 2022-06-07T00:51:01Z