Library not updating pcb layout regardless to approach

Tiksom — Fri, 11 Nov 2022 10:33:24 GMT

I`m pulling my head as to unrelialbe way of editing the libriaries in F360 electronics.

No matter how many times i try to edit the pad spacing, the library pcb layout is ok, but when inserted to design the problem remains. I saved numerus times, renamed, deleted/added. This is just silly and I`m sure it`s not that complicated.

Video

https://screencast.autodesk.com/Embed/Timeline/acbf68c5-9d42-433e-a2f4-f55707567373

Re: Library not updating pcb layout regardless to approach

jorge_garcia — Fri, 11 Nov 2022 19:57:15 GMT

Hi @Tiksom ,

I hope you're doing well. You are getting bit by the annular ring settings(formerly known as restring). See this blog post for the full details
https://www.autodesk.com/products/fusion-360/blog/what-you-didnt-know-about-eagle-restring/

In short what's happening here, is that the default annular ring settings are causing your pads to swell a little and that creates the clearance violations you are seeing. Your part is made correctly in the library, so you don't have to look there.

Best Regards,

topic Re: Library not updating pcb layout regardless to approach in Fusion Electronics Forum

Library not updating pcb layout regardless to approach

Re: Library not updating pcb layout regardless to approach