dimension cutout of PCB is not showing in

akshay_naikwade — Tue, 30 May 2023 11:51:47 GMT

Hello Sir,

We are designing pcb for our company and for that we have added cutout for the pcb fitting in enclosure.

Till yesterday it is looking ok but suddenly diamension cutout is disappear.Also its look ok in 3d but problem occurs in manufacturing view and gerber viewing .

I dont know why it is happening but we have to recover it .

Give us solution ASAP.

I am attaching snaps for your understanding.

Thank You.

Re: dimension cutout of PCB is not showing in

jorge_garcia — Tue, 30 May 2023 22:00:15 GMT

Hi @akshay_naikwade,

I hope you're doing well. Looking at the first picture I can see that the board shape is not being detected. First thing to check out is to go to Preferences > Electronics and make sure the Detect Board shape checkbox is checked. If it's not that's your problem.

If it is checked, then you'll have to look at each segment of the board outline to make sure it is a perfectly closed contour, because there is some tiny gap(not visible) in the outline somewhere. Use the inspector to verify all of your endpoints lineup.

Let me know if there's anything else I can do for you.

Best Regards,

topic Re: dimension cutout of PCB is not showing in in Fusion Electronics Forum

dimension cutout of PCB is not showing in

Re: dimension cutout of PCB is not showing in