topic Re: Import ADS Keysight in Fusion Electronics Forum

Import ADS Keysight

reinreinf — Thu, 16 Nov 2023 14:22:55 GMT

Hello there,

has someone an idea how to import a layout from ads Keysight to Fusion 360 to create a board file? I already imported it with an .dxf format but there you only get the CAD data...

Thank you much in advance.

Re: Import ADS Keysight

jorge_garcia — Thu, 16 Nov 2023 21:35:58 GMT

Hello @reinreinf,

I hope you're doing well. What type of data are you trying to get into Fusion? For RF, generally the geometry is the most critical part.

I'm not familiar with ADS keysight so excuse me if I have made some incorrect assumptions.

Best Regards,

Re: Import ADS Keysight

reinreinf — Sat, 18 Nov 2023 19:34:47 GMT

The goal is to create a board file with all relevant data in fusion. So I only achieved to get CAD Data to Fusion, but I didn´t get the ADS data into a board file in fusion.

Re: Import ADS Keysight

jorge_garcia — Mon, 20 Nov 2023 22:44:19 GMT

Hello @reinreinf,

I hope you're doing well. Unfortunately, we can't import anything from ADS. If they can export EAGLE format then we could open that in Fusion but currently we don't have any other import options.

Let me know if there's anything else I can do for you.

Best Regards,