Components will NOT rotate or move once I start routing or reopen past project.

oloughlc — Wed, 21 Feb 2024 20:26:12 GMT

Hi All,

Am I missing something, or is this just a terrible feature of Fusion? I opened a project that I started days ago, I have a few routed wires but the components I am trying to move and rotate have nothing routed to them, but when I try to rotate or move them a weird box pops that never did before to choose the type of rotation but regardless of the selection it will not move or rotate. It is as if the components are locked but I try to toggle the lock and unlock feature to no avial.

Any suggestions?

Thanks!

Re: Components will NOT rotate or move once I start routing or reopen past project.

jorge_garcia — Wed, 21 Feb 2024 20:41:04 GMT

Hello @oloughlc ,

I hope you're doing well. Couple of things to check:

1) Make sure the selection filter has everything selected

2) If you can see the component origins make sure that it looks like a + sign and not an x

Let's start there. If you can post an image of what you are seeing, that would really help.

Best Regards,

topic Re: Components will NOT rotate or move once I start routing or reopen past project. in Fusion Electronics Forum

Components will NOT rotate or move once I start routing or reopen past project.

Re: Components will NOT rotate or move once I start routing or reopen past project.