topic Beginner Fusion Electronics Videos and Tutorials in Fusion Electronics Forum

Beginner Fusion Electronics Videos and Tutorials

btzin — Fri, 22 Mar 2024 14:24:27 GMT

Hello,

Is there any place where one can access Videos and Tutorials with regard to Fusion Electronics.

Something on the lines of the Tutorials on YouTube available my Lars Christensen for the Mechanical

Design aspects... his videos are top-notch.

Not finding anything like them for the Electronics Design in Fusion. The ones available are more like

4-5 years old, and most of them is with Eagle centric and Eagle based interface...

Some new videos and tutorials with regard to latest Fusion Electronics for Schematics, PCB Layout and Libraries?

Thanks!!

Re: Beginner Fusion Electronics Videos and Tutorials

jorge_garcia — Fri, 22 Mar 2024 17:36:11 GMT

Hello @btzin,

I hope you're doing well. Here are some of the more recent Fusion video tutorials.

https://www.youtube.com/playlist?list=PLmA_xUT-8UlKE-U-eEqrkNEI7rd1fUnLY

https://www.youtube.com/playlist?list=PLmA_xUT-8UlL80Xm8Gxz98YNum3I9GInr

https://www.youtube.com/playlist?list=PLmA_xUT-8UlL5wTsDLkXtj_nBwojmRf5b

Let me know if there's anything else I can do for you.

Best Regards,

Re: Beginner Fusion Electronics Videos and Tutorials

btzin — Fri, 22 Mar 2024 19:36:11 GMT

Thanks. Unless I have missed, but these are completely missing stuff like simulation and rework, extraction, back-annotation...drc/erc... currently very difficult to look seriously at Fusion Electronics when you have had some experience with more Mature Electronic Design Software... there is absence of information and tutorial use cases even for things like simulation, rework, which you see readily available in the menus... any other sources, except the ones already mentioned by you in the previous post? Thanks!

Re: Beginner Fusion Electronics Videos and Tutorials

jorge_garcia — Fri, 22 Mar 2024 20:21:28 GMT

Hi @btzin,

What tool are you familiar with? Fusion manages forward/backward annotation in real-time so you never have to worry about manually syncing the schematic and board together. The beginner board video covers DRC briefly. If you want more detailed info you can find the documentation here:

https://help.autodesk.com/view/fusion360/ENU/?guid=ECD-OVERVIEW

What type of rework are you looking to do? Or are you just looking for command info? If you are looking for command info you'll find it in the link above.

Let me know if there's anything else I can do for you.

Best Regards,

Re: Beginner Fusion Electronics Videos and Tutorials

btzin — Sat, 23 Mar 2024 02:55:21 GMT

Can you please point to information, video tutorials on Spice Simulation too.

Re: Beginner Fusion Electronics Videos and Tutorials

btzin — Mon, 01 Apr 2024 14:08:14 GMT

Hey, just bumping the thread again... if someone can point to a useful tutorial of circuit simulation within Fusion Electronics...