topic Betreff: Export traces layout in Fusion Electronics Forum

Export traces layout

lovro_kocevarribic — Fri, 22 Mar 2024 22:38:33 GMT

I have an educational license for Fusion. I design my PCBs with Fusion and I would like to manufacture them at home using acid etching. To do that, I need only the copper trace layout without components on it because I transfer toner to the PCB to protect the traces. If I go to outputs and click print, it shows copper traces and component layout. Is there any way to export them in real size?

I manufacture them at home because it takes very long to ship them to my country, and it is cheaper to make them at home because I make a maximum of 2 pieces.

Thank you for answers.

Betreff: Export traces layout

m.neujahr_at_moe — Sat, 23 Mar 2024 15:39:55 GMT

Hello @lovro_kocevarribic ,

you can print out sperate layers if you first only turn on those layers you want to manufacture:

Normaly for top:
- Top, dimension, vias and pads
Normaly for bottom:
- Bottom, dimension vias and pads

You can now print your design.

If you want to "mirror" your printout, you can set it in the print dialog: