topic Re: CAM Processor BOM Generation in Fusion Electronics Forum

CAM Processor BOM Generation

mike.durian — Sun, 15 Mar 2026 17:17:27 GMT

If I export a BOM from the schematic, I can select which attributes appear in the BOM. However, I can't figure out how I select which columns appear when I export a BOM via the CAM Processor. Is this ability squirreled away somewhere or just not available?

I do like the idea of using one click to export everything I need as opposed to exporting the BOM in one place and the Gerbers, ODB++, Pick and Place, etc. elsewhere. When doing one click exporting from the CAM Processor, I'd also like to be able to create a STEP file and Netlist.

Feature request: when exporting a BOM from the schematic, allow me to edit the column label for the attribute. E.g. display BOM_DESC values but let me label the column "Description".

Re: CAM Processor BOM Generation

jorge_garcia — Tue, 17 Mar 2026 21:24:58 GMT

Hello ,

The CAM processor is currently still hooked into the old BOM.ulp, the new BOM dialog doesn't pipe into it. I'll make an enhancement request for this.

I actually have to make enhancement requests for all of this. Thank you for the ideas, I'll make sure they get to the developers.

Let me know if there's anything else I can do for you.

Best Regards,

Re: CAM Processor BOM Generation

mike.durian — Tue, 17 Mar 2026 22:02:13 GMT

Thank you!