topic Re: Fusion Electronics crashing when routing a trace in Fusion Electronics Forum

Fusion Electronics crashing when routing a trace

al_walker — Tue, 03 Mar 2026 05:30:27 GMT

I have been getting this issue consistently over the last few days, when all I am doing is routing a trace.

Please note: I haven't yet updated to the March 2026 release.

Kind regards,

Re: Fusion Electronics crashing when routing a trace

al_walker — Tue, 03 Mar 2026 05:47:30 GMT

And again just now...

Re: Fusion Electronics crashing when routing a trace

jorge_garcia — Tue, 03 Mar 2026 16:57:36 GMT

Hello @al_walker ,

I hope this message finds you well. Are you able to get it to happen consistently on a specific signal or trace? The hard thing about that error is that it is often difficult to reproduce, you might get that error and then re-route the trace and not get it.

Let me know if you find a reproducible way to get that error to show up. We will need an example file to test in order to trouble shoot and be able to get to the bottom of this.

Best Regards,

Re: Fusion Electronics crashing when routing a trace

al_walker — Wed, 04 Mar 2026 01:22:55 GMT

Hi @jorge_garcia

I can provoke it consistently on the AUDIO_CLK_EN signal, routed on the bottom layer as shown:

I will send you the project file by email.

Kind regards,