topic Stop-Layer not Rendering in 3D View in Fusion Electronics Forum

Stop-Layer not Rendering in 3D View

sh9WZ6F — Fri, 24 Oct 2025 05:58:34 GMT

Hi,

I am searching for the issue which makes my Test and Symbols on the Stop-Layer disappear in 3D view.

I already narrowed it down to my WEEE Symbol.

But I do not see the root cause, why the WEEE Symbol destroys Rendering.

Do you have any Idea?

Test-PCB without WEEE Symbol:

Test PCB with WEEE Symbol:

You can clearly see that if I add the WEEE Symbol, nothing renders to the Stop-Layer in the 3D PCB.

The WEEE Symbol is not very complex. So, I do not understand at the moment, why it crashed the Stop-Layer creation.

Thank you in Advance!

Re: Stop-Layer not Rendering in 3D View

sh9WZ6F — Fri, 24 Oct 2025 06:20:30 GMT

Hi,

I could narrow it down to one of the Elements of the Lid of the WEEE Bin.

For that I copied the Elements of the Library Footprint directly to the PCB and started altering / deleting things.

If I delete one of the remaining elements, rendering starts working again.

Why this happens, I still do not understand.

Thank you in advance!

Re: Stop-Layer not Rendering in 3D View

jorge_garcia — Fri, 24 Oct 2025 18:10:26 GMT

Hi @sh9WZ6F,

I hope you're doing well. I have created an bug report for this issue. Thank you very much for generously sharing the files. I'll post as soon as I have an update.

Let me know if there's anything else I can do for you.

Best Regards,

Re: Stop-Layer not Rendering in 3D View

sh9WZ6F — Mon, 27 Oct 2025 09:18:05 GMT

Hi @jorge_garcia,

thank you, thats all.

I hope this helps.

Best regards,

Sebastian