topic bug: `help` in command line mode goes to 404 url in Fusion Electronics Forum

bug: `help` in command line mode goes to 404 url

samykamkar — Fri, 12 Sep 2025 22:47:49 GMT

bug: just typing `help` in command line mode (`/` to activate command line) goes to a 404 url, https://help.autodesk.com/view/fusion360/ENU/?guid=ECD-REFERENCE

Re: bug: `help` in command line mode goes to 404 url

jorge_garcia — Mon, 15 Sep 2025 17:16:04 GMT

Hi @samykamkar ,

This is definitely a bug, I'll make a ticket for it.

UPDATE: I just tried it on my windows machine and it takes you to a live page. I wonder if it's Mac only, I'll ask my colleagues to confirm.

Let me know if there's anything else I can do for you.

Best Regards,

Re: bug: `help` in command line mode goes to 404 url

samykamkar — Mon, 15 Sep 2025 20:00:54 GMT

thanks, I'm on mac and it goes to https://help.autodesk.com/view/fusion360/ENU/?guid=ECD-REFERENCE

Re: bug: `help` in command line mode goes to 404 url

jorge_garcia — Tue, 16 Sep 2025 16:14:53 GMT

Hi @samykamkar ,

Could you update to the latest version of Fusion if you haven't done so already? According to the devs this was fixed a couple of months ago and I can get it go to a live page on windows.

Let me know if you continue to run into trouble.

Best Regards,

Re: bug: `help` in command line mode goes to 404 url

samykamkar — Tue, 16 Sep 2025 18:34:10 GMT

I'm running the late (allegedly, I don't see any updates) but have the issue, happens in both schematic and board editor

Re: bug: `help` in command line mode goes to 404 url

chuck_toddN7PTC — Wed, 17 Sep 2025 13:50:08 GMT

I can verify this.

Typing 'help' in both schematic and 2D PCB sends me to the following web address.

https://help.autodesk.com/view/fusion360/ENU/?guid=ECD-REFERENCE-CPT