topic Re: Several application errors in Fusion Electronics Forum

Several application errors

Anonymous — Thu, 26 Mar 2020 11:38:11 GMT

Hello,

When I want to move a group of elements I choose the "select" tool, unfortunately I often have to select 2x, because the first time is not checked.

In the program settings I have increased the contrast of the selected elements, (I marked "high contrast" and increased the slider to 3/4) everything is ok, but after a while the settings return to the default, although when I go back to the settings everything is well set. After clicking only OK everything is ok again - for a short time.

On one monitor I have a schematic file, and on the other PCB, when I choose the option of highlighting an element / path, the selected element on one screen is marked, and on the other randomly, sometimes, I move the cursor to the other monitor, the selection disappears.

Re: Several application errors

Anonymous — Fri, 27 Mar 2020 09:44:56 GMT

I found more problems. I finished the project, I clicked on "Errors" showed me that I had 2 errors - "airvire", although it was connected. Ok, I deleted the path and created it again. I was very surprised, because instead of 2 mistakes I already had 4. I removed this path again and put it again, this time there were already 6 errors.

Re: Several application errors

ESCAPEKIT — Fri, 27 Mar 2020 11:08:59 GMT

Yes, this happens. It had happened to me already in Eagle so I just verify visually that it is in fact connected and I approve the error so it doesn't show anymore.

Re: Several application errors

Anonymous — Fri, 27 Mar 2020 13:08:24 GMT

Another problem is the use of import-bmp.ulp, from what I see in the forum other people do not have a problem with it, every time I want to run the script I get the message: "error in constant". I downloaded the same script from autodesk website, to no avail.

Re: Several application errors

jorge_garcia — Fri, 27 Mar 2020 21:01:59 GMT

Hello @Anonymous,

I hope you're doing well. Is it able to open at all or you just get that error right off the bat? Could you try it in a different design to see if it behaves the same way?

Let me know if there's anything else I can do for you.

Best Regards,

Re: Several application errors

Anonymous — Mon, 30 Mar 2020 06:07:14 GMT

hmmm weird, it didn't work on Friday, now it seems that it's ok

Re: Several application errors

Anonymous — Tue, 31 Mar 2020 07:27:05 GMT

I found another 2 problems.

First with generating gerber files. I made a very simple adapter.

the preview of the generated gerber file looks like this:

next gerver viewer:

another problem concerns the 3D preview, it looks like this:

Re: Several application errors

jorge_garcia — Thu, 02 Apr 2020 20:10:25 GMT

Hello @Anonymous,

I hope you're doing well. What gerber viewers did you use? Something looks definitely off there. I'll ping the developers on this for review.

Let me know if there's anything else I can do for you.

Best Regards,

Re: Several application errors

Anonymous — Fri, 03 Apr 2020 05:20:48 GMT

I use gerbv, it never let me down, the second picture is from the preview at jlcpcb.com. I noticed that sometimes when I restart the program (fusion) the problem disappears, but not always.

Re: Several application errors

jorge_garcia — Fri, 03 Apr 2020 16:29:58 GMT

Hi @Anonymous,

I hope you're doing well. I don't trust the jlcpcb.com preview at all, I've had to deal with a lot of issues with them. I've worked with gerbv a lot and even though it's lead me astray a couple of times, it's very solid and I do trust it.

Would you be able to share the gerbers for review?

Best Regards,

Re: Several application errors

ampio — Mon, 11 May 2020 08:42:13 GMT

I was able to call this error again, in the attachment I send incorrectly generated gerber files.