https://forums.autodesk.com/t5/fusion-electronics-forum/ecad-eagle-net-class-limitation/m-p/9472093#M17771 <P>Is there a limit for the number of allowed net classes?&nbsp; I am trying to route a board with dozens of differential signals and I am unable to add more then 16 net classes (including the default) and therefore I can not assign all of the needed differential pairs.</P> Mon, 27 Apr 2020 00:13:38 GMT scott.nortman 2020-04-27T00:13:38Z https://forums.autodesk.com/t5/fusion-electronics-forum/ecad-eagle-net-class-limitation/m-p/9472093#M17771 <P>Is there a limit for the number of allowed net classes?&nbsp; I am trying to route a board with dozens of differential signals and I am unable to add more then 16 net classes (including the default) and therefore I can not assign all of the needed differential pairs.</P> Mon, 27 Apr 2020 00:13:38 GMT https://forums.autodesk.com/t5/fusion-electronics-forum/ecad-eagle-net-class-limitation/m-p/9472093#M17771 scott.nortman 2020-04-27T00:13:38Z https://forums.autodesk.com/t5/fusion-electronics-forum/ecad-eagle-net-class-limitation/m-p/10560636#M17772 <P>Same here with 9.6.2.</P><P>Any information about that? I have to length-match a couple of MII and bus traces. As it seems like Eagle does only support single and diff pair matching I have to use a combination of net classes and a python script. A limitation of net classes makes my life much more difficult.</P> Fri, 20 Aug 2021 11:55:24 GMT https://forums.autodesk.com/t5/fusion-electronics-forum/ecad-eagle-net-class-limitation/m-p/10560636#M17772 purchasingC6FDE 2021-08-20T11:55:24Z