topic CPL File in Fusion Electronics Forum

CPL File

san.cho — Thu, 18 Jun 2020 18:04:51 GMT

Hello,

I have a schematic of my printed circuit board as well as the board design, and the company I am purchasing the boards from requested a CPL File. The CPL file is only accepted in XLS,XLSX,CSV file format. I am using Fusion 360 Electrical to do this. I do not see how to make a CPL file from my drawing. Does Fusion Electrical provide CPL drawings? If so, how will I export this?

Re: CPL File

yqliu — Fri, 19 Jun 2020 03:02:36 GMT

Is the following command helpful?

Re: CPL File

san.cho — Fri, 19 Jun 2020 17:02:14 GMT

This is great, thanks!

Re: CPL File

carl.stevens — Fri, 25 Feb 2022 23:54:51 GMT

That option does not create a clp file it makes mnt file. Is there a conversion or some other way fusion can create need clp files?

Re: CPL File

jorge_garcia — Mon, 28 Feb 2022 21:09:53 GMT

Hi @carl.stevens,

I hope you're doing well. File extensions are not very specific in our industry, if the clp file is a mount or pick and place file then the .mnt will satisfy those requirements.

Let me know if there's anything else I can do for you.

Best Regards,

Re: CPL File

developerNR7HT — Thu, 08 Dec 2022 11:51:24 GMT

There are manufacturer who wants a CPL file in xls or csv format. So this industry standard is not accepted everywhere.

Re: CPL File

tadas_sperauskas — Fri, 25 Aug 2023 11:25:58 GMT

So, how to get xls file for Pick and Place, because https://jlcpcb.com/ requires that format. They do not accept mnt.

Re: CPL File

jorge_garcia — Fri, 25 Aug 2023 18:18:04 GMT

Hi @tadas_sperauskas ,

The .mnt file contains the data needed. Try changing it's extension to .csv or .xls and see if it will take it.

If not then follow the directions here on JLCPCBs site
https://jlcpcb.com/help/article/82-How-to-generate-BOM-and-CPL-from-Eagle-CAD-automatically

Let me know if there's anything else I can do for you.

Best Regards,