topic Re: Design Rules bug in Fusion Electronics Forum

Design Rules bug

n.smithHJCP5 — Thu, 03 Oct 2024 17:17:00 GMT

Trying out the new Design Rule editor in v2.0.20256 x86_64.

I created the following table

Note the bottom right class "51-150V, <15A" in both boxes.

I hit OK to close the Design Rules. I reopen them. Then the window looks like this.

When I hit the drop down, it doesn't even indicate what 2 are selected

Did I do something wrong? I know I selected "Copper Clearance (Different Signals)" and selected the same two signals for both. But I don't think that explains what's happening here.

Re: Design Rules bug

jorge_garcia — Thu, 03 Oct 2024 19:08:28 GMT

Hello @n.smithHJCP5,

How many netclasses do you have in total? From the images you can see that there is a checkmark for default. The checkmark lets you know what netclasses are selected. If you have more than 7 netclasses if could be that one of the other netclasses is selected.

You should be able to scroll through the list and find the other checkmark, let me know if you can't scroll. Try unchecking default and see if that shows you what the other netclass is.

I don't think you've done anything wrong, I'll speak to the devs in case the special characters are messing with the rules.

Best Regards,

Re: Design Rules bug

n.smithHJCP5 — Thu, 03 Oct 2024 19:24:50 GMT

All the net classes are shown. I'm fairly certain it was a special characters issue. I changed the name from
"51-150V, <15A"
to
"51-150V under 15A"

and the issue is fixed.

I'm fairly certain what was happening is by having the two similarly named "51-150V, <15A" "51-150V, >15A" Fusion was confusing the two.

Re: Design Rules bug

panpan_fan — Tue, 19 Nov 2024 03:38:05 GMT

Hi @n.smithHJCP5

I hope you are doing well!
Today we release Fusion V2.0.20754 and this issue should be fixed now.

Please have a try, thanks a lot!
Regards,

Panpan Fan