https://forums.autodesk.com/t5/fusion-electronics-forum/missing-pads-when-exporting-to-gerbel-file-and-traces-0-width/m-p/9678669#M16494 <P>I found the solution. Apparantly switch to the American windows region it solved everything. It was a problem with a comma instead of a decimal point</P> Fri, 07 Aug 2020 10:10:07 GMT Anonymous 2020-08-07T10:10:07Z https://forums.autodesk.com/t5/fusion-electronics-forum/missing-pads-when-exporting-to-gerbel-file-and-traces-0-width/m-p/9678571#M16493 <P>Hi</P><P>&nbsp;</P><P>This is the first PCB I'm making and maybe I'm missing something but in fusion all my pads are there and placed correctly but when I check the gerbel file online I see that some pads are missing in the preview. The PCB manufacturer also noticed this and warned before production. It also seems that all the traces are 0 width while I can see them in fusion.</P><P>&nbsp;</P><P>Can someone maybe explain what is going here or if this is a bug?</P><P>&nbsp;</P><P>Kind Regards,</P><P>Xander</P> Fri, 07 Aug 2020 09:30:24 GMT https://forums.autodesk.com/t5/fusion-electronics-forum/missing-pads-when-exporting-to-gerbel-file-and-traces-0-width/m-p/9678571#M16493 Anonymous 2020-08-07T09:30:24Z https://forums.autodesk.com/t5/fusion-electronics-forum/missing-pads-when-exporting-to-gerbel-file-and-traces-0-width/m-p/9678669#M16494 <P>I found the solution. Apparantly switch to the American windows region it solved everything. It was a problem with a comma instead of a decimal point</P> Fri, 07 Aug 2020 10:10:07 GMT https://forums.autodesk.com/t5/fusion-electronics-forum/missing-pads-when-exporting-to-gerbel-file-and-traces-0-width/m-p/9678669#M16494 Anonymous 2020-08-07T10:10:07Z