topic BUG? moving a routed wire detaches polygon pours in Fusion Electronics Forum

BUG? moving a routed wire detaches polygon pours

rprovideo — Wed, 09 Oct 2024 23:59:16 GMT

I have a board with a copper pour on the bottom, connected to GND. If I move a wire with the polygon pour visible, all is well. If I hide the polygon pour, and move a wire, all GND connections detach and become an airwire. re-enabling or refilling the polygon pour recovers this, so it seems the polygon is only following changes when its visible (and it was changed as I moved the wire). However, this leads to unintended and unnecessary airwires.

I made a screen recording and tried to post, but the upload gets stuck at 4.7MB, so I gave up.

Re: BUG? moving a routed wire detaches polygon pours

jorge_garcia — Thu, 10 Oct 2024 16:55:51 GMT

Hi @rprovideo,

So this is actually as designed from what I know. I agree the unnecessary airwires shouldn't show up but re-filing the polys makes them go away so doesn't feel like a big deal. I'll report it anyway, because if we could not have them automatically show up that would be better.

Let me know if there's anything else I can do for you.

Best Regards,

Re: BUG? moving a routed wire detaches polygon pours

rprovideo — Thu, 10 Oct 2024 20:01:21 GMT

they not only show up, the airwires throw an error when a check is run.