topic Re: After startup and libraries update - can not close Library Manager window in Fusion Electronics Forum

After startup and libraries update - can not close Library Manager window

christopher2KLSVU — Thu, 22 Oct 2020 10:41:16 GMT

Windows system Close function does not help same with main Fusion window. These are peanuts but..never happened before last update.

I have killed the main process, and after new startup is fine.

Re: After startup and libraries update - can not close Library Manager window

HelenChen-AutodeskQA — Wed, 28 Oct 2020 01:12:03 GMT

Hi @christopher2KLSVU ,

Sorry to hear that you're having trouble.

Fusion 360 had an update yesterday and the latest version is 2.0.9305.

Could you please upgrade to the latest version and see whether you still have the issue - "cannot close library manager window"? Maybe you could restart the machine to have a try again.

Hope it works well for you now.

Regards,

Helen

Re: After startup and libraries update - can not close Library Manager window

christopher2KLSVU — Wed, 28 Oct 2020 09:31:08 GMT

This was just once after previous update. Not seen again.

Re: After startup and libraries update - can not close Library Manager window

HelenChen-AutodeskQA — Wed, 28 Oct 2020 09:53:28 GMT

Thank you very much for your updates, @christopher2KLSVU .

It's so glad to hear that it works for you now.

Please feel free to let us know if you need our further assistant.

Regards,

Helen

Re: After startup and libraries update - can not close Library Manager window

christopher2KLSVU — Wed, 28 Oct 2020 13:03:10 GMT

With fresh installed fusion I see the same problem again. All tabs closed, opening the project from panel data, then I become blue bar with message that libraries have to be updated, done, but I can not close Library manager window. Thus I must kill f360.

Re: After startup and libraries update - can not close Library Manager window

HelenChen-AutodeskQA — Wed, 28 Oct 2020 15:57:31 GMT

Hi @christopher2KLSVU ,

Sorry that you are having trouble now.

I tried both on Windows 10 and Mac 10.15.7, I cannot reproduce this crash unfortunately.

Could you please take a screen shot of the blue message you see in the editor? Actually I cannot see the blue message you mentioned in my design... (not sure whether I missed anything...)

Could you please try to add part in the schematic file > select the part to add whose library need to be updated > In the pop up dialog to remind upgrade the library, choose to upgrade the library > place the updated part in the editor?

I'd want to see whether this workflow works for you or not?

Thank you very much for your help.

Regards,

Helen

Re: After startup and libraries update - can not close Library Manager window

christopher2KLSVU — Wed, 28 Oct 2020 17:23:31 GMT

I have not had windows blue screen. It was light blue bar as usually what force me to update managed libraries. The bar Actually it is every time after start up of fusion. Nothing special just library manager window can not be closed.