topic Consistency problems between schematic and board in Fusion Electronics Forum

Consistency problems between schematic and board

jcsantilli — Thu, 05 Nov 2020 18:17:30 GMT

I have a few pins in the schematic that are not consistent with the pins on the board. How can I fix that. There is a video I can watch to learn how to resolve this issue?

Thanks

Re: Consistency problems between schematic and board

jorge_garcia — Mon, 09 Nov 2020 22:54:14 GMT

Hi @jcsantilli,

I hope you're doing well. Could you elaborate a little bit? What do you mean by pins in the schematic not being consistent with those on the board?

Do you mean that you see more pads on the layout than there are pins in the schematics? If that's the case, that's a normal workflow. If there are pads that duplicate a particular signal they can often be assigned to one pin in the symbol.

Let me know if there's anything else I can do for you.

Best Regards,

Re: Consistency problems between schematic and board

jcsantilli — Tue, 10 Nov 2020 01:44:55 GMT

Hi Jorge,

What I did is to copy the reference file of the Mega and deleted all the components in order to have a blank arduino board. I'm guessing there is a problem with the 5V and GND pins but no idea what. Sorry, tried to upload the files but looks like this type of files are not supported.

Thanks