topic Re: Support for spacemouse in fusion electronics? in Fusion Electronics Forum

Support for spacemouse in fusion electronics?

chris.eganY2EK3 — Wed, 16 Jun 2021 15:12:39 GMT

I use a space mouse a lot for general CAD design, but for whatever reason it does not work in the electronics workspaces. Obviously there is no rotate, but it would be awesome to gain support for pan/zoom to make it easier to move around a PCB when zoomed in.

Is it possible that this does work and something is wrong with my drivers/setup/configuration, but nothing I've tried makes it work so far.

Re: Support for spacemouse in fusion electronics?

ritste20 — Wed, 16 Jun 2021 15:36:17 GMT

I use my space mouse every day for 3D modeling but I can't say I've ever tried it in electronics. I will have to see if it works on mine.

Regards,

Re: Support for spacemouse in fusion electronics?

jerry_gabrie — Sun, 16 Oct 2022 17:55:27 GMT

Does anyone know how to turn on the pan feature in electronics? I use my spacemouse for everything and I would like to also use it for fusion360 electronics. I can only zoom in/out.

Thanks,

-JG

Re: Support for spacemouse in fusion electronics?

chris.eganY2EK3 — Mon, 17 Oct 2022 03:47:40 GMT

Until Autodesk does something you can't. Fusion electronics flat out doesn't support it right now.

Re: Support for spacemouse in fusion electronics?

CBL_CP — Tue, 18 Oct 2022 07:01:47 GMT

Yes, my company made me switch from Altium to F360 back in 2020. It was a really bad year. I am still struggling with getting productivity up. I am really missing spacemouse support. I am struggling on so many levels to understand why on earth this has not been implemented already, along with other things eg. via stitching. 🙄

Re: Support for spacemouse in fusion electronics?

jerry_gabrie — Tue, 18 Oct 2022 18:03:31 GMT

Re: Support for spacemouse in fusion electronics?

jorge_garcia — Tue, 18 Oct 2022 20:30:14 GMT

Hello @jerry_gabrie ,

I'll add your voice to the existing ticket for this feature. In order to pan, you have to do a middle-mouse button click and hold. Whatever button you configure on the Spacemouse to represent a middle mouse click is the one you would use to pan.

There are several ways to do via stitching in Fusion Electronics, you could do it through a ULP or activate the VIA command set the name by typing 'PUT_NAME_HERE' followed by enter. This will name the vias to whatever net you want them to connect to, every time you click to drop a via the via will automatically connect to the net named PUT_NAME_HERE.

Let me know if you continue to run into problems.

Best Regards,

Re: Support for spacemouse in fusion electronics?

jerry_gabrie — Tue, 18 Oct 2022 23:57:22 GMT

Thanks for the tips Jorge.

On your via naming tip. I tried it and it wouldn't recognize the 'option'.

Here are my steps:

First Method:

1. Activate via command

2. Start typing the net name "GND" - it brings up the grid settings panel right after pressing g - since 'g' is the hotkey for opening the grid settings

Method 2:

1. Activate via command

2.Press '/' to activate command line mode

3.Typed GND followed by enter

4. Then I get an error window on the bottom right saying "Invalid option: GND"

Let me know what I am doing wrong. This would be a great feature to speed up via stitching.

Thanks,

-JG

Here is the screencast of my attempts: https://knowledge.autodesk.com/community/screencast/6645f301-9dba-4f31-81d3-3cc3549ca42d

Re: Support for spacemouse in fusion electronics?

ritste20 — Wed, 19 Oct 2022 09:05:55 GMT

Try using single quotes instead.

Regards,

Re: Support for spacemouse in fusion electronics?

jorge_garcia — Wed, 19 Oct 2022 18:20:10 GMT

Hi @jerry_gabrie,

I hope you're doing well. Use option 2 but like @ritste20 mentioned you need to put the name in single quotes then press enter.

Let me know if there's anything else I can do for you.

Best Regards,

Re: Support for spacemouse in fusion electronics?

jerry_gabrie — Fri, 21 Oct 2022 05:55:20 GMT

Thanks guys, it worked! @jorge_garcia @ritste20

-JG

Re: Support for spacemouse in fusion electronics?

chris.eganY2EK3 — Wed, 11 Feb 2026 21:55:56 GMT

One more request to please implement this. I am so used to using the space mouse in fusion that I consantly reach for it in electronics designs and get angry that it doesn't work. I have a whole macropad designed around the space mouse for keyboard shortcuts, including electronics specific ones, and it's annoying to not be able to move around the window with my hand already there.

Re: Support for spacemouse in fusion electronics?

jorge_garcia — Thu, 12 Feb 2026 17:54:32 GMT

Hi @chris.eganY2EK3 ,

This is almost at the finish line, just hold out a little longer. 😁

Let me know if there's anything else I can do for you.

Best Regards,

Re: Support for spacemouse in fusion electronics?

chris.eganY2EK3 — Mon, 20 Apr 2026 16:28:05 GMT

Figured I would post some appreciation for once, because FINALLY, the spacemouse works in the electronics workspaces.