https://forums.autodesk.com/t5/fusion-electronics-forum/spacebar-not-adding-via/m-p/10457175#M12406 <P>Today I started routing a two layer PCB. The bottom layer is filled with a polygon pour attached to GND. When routing I normally press the spacebar to add a via. For some reason this is not working and have to use the via command, which is really clumsy. Was there a recent update the remapped the spacebar?</P> Sat, 10 Jul 2021 00:17:16 GMT infinite.machinery 2021-07-10T00:17:16Z https://forums.autodesk.com/t5/fusion-electronics-forum/spacebar-not-adding-via/m-p/10457175#M12406 <P>Today I started routing a two layer PCB. The bottom layer is filled with a polygon pour attached to GND. When routing I normally press the spacebar to add a via. For some reason this is not working and have to use the via command, which is really clumsy. Was there a recent update the remapped the spacebar?</P> Sat, 10 Jul 2021 00:17:16 GMT https://forums.autodesk.com/t5/fusion-electronics-forum/spacebar-not-adding-via/m-p/10457175#M12406 infinite.machinery 2021-07-10T00:17:16Z https://forums.autodesk.com/t5/fusion-electronics-forum/spacebar-not-adding-via/m-p/10459035#M12407 <P>I just learned yesterday that the spacebar trick only works on visible layers. Do you have layer 16 turned off?</P><P>&nbsp;</P><P>Regards,</P><P>&nbsp;</P> Sun, 11 Jul 2021 03:17:27 GMT https://forums.autodesk.com/t5/fusion-electronics-forum/spacebar-not-adding-via/m-p/10459035#M12407 ritste20 2021-07-11T03:17:27Z