topic Creating a Pick and Place CSV file in Fusion Electronics Forum

Creating a Pick and Place CSV file

erica7BQKN — Mon, 23 Aug 2021 09:54:52 GMT

Hi, I'm struggling to create a pick and place CSV file within fusion 360.

I've tried the automatic pick and place under 'manufacture' but this only saved as an mnt file. I also tried to run ULP under 'automation' and create a centroid file however I had issues saving this.

Is there any other way I can save a pick and place CSV file?

Thanks in advance!

Re: Creating a Pick and Place CSV file

RichardHammerl — Tue, 24 Aug 2021 11:48:26 GMT

Hi @erica7BQKN

the CAM Processor can create Pick&Place data for you. IN the Assembly section you find pick&place. It can be exported as CSV.

Hope this helps.

Best regards,

Re: Creating a Pick and Place CSV file

erica7BQKN — Tue, 24 Aug 2021 14:22:33 GMT

Great, thanks @RichardHammerl this worked perfectly, thank you so much for your help!

Is there any way to obtain both front and back pick and place files into one file?

Thanks again,

Erica