topic Re: problem with custom pads and 3d model sync in Fusion Electronics Forum

problem with custom pads and 3d model sync

anastasov.rosen — Thu, 18 Nov 2021 08:38:05 GMT

Hi, I have following problem:

I have footprint with non-standard hole SMD-PAD + Milling

footprint-smd-milling

when I put the part on schematic and on pcb everything is ok, I can move the part and on cam preview milled holes moved with the part, but when I create 3d model of pcb and move the part old milled part not moved and they stay on the model. How to solve this issue ?

Re: problem with custom pads and 3d model sync

jorge_garcia — Thu, 18 Nov 2021 18:58:27 GMT

Hi @anastasov.rosen ,

I hope you're doing well. From the 2D PCB go ahead and click Push to 3D PCB, it should update the locations of those holes. Can you confirm if that works for you?

Best Regards,

Re: problem with custom pads and 3d model sync

anastasov.rosen — Thu, 18 Nov 2021 19:28:42 GMT

Hi @jorge_garcia ,

I do that all the times but without success (I mean all type of combination push to 3D and push to 3D with option).

When I move the part 3th time milled holes from 1st placement are disappeared and new ones from 2nd one are on the 3D model.

Best Regards

Re: problem with custom pads and 3d model sync

panpan_fan — Mon, 22 Nov 2021 03:44:06 GMT

Hi @anastasov.rosen

I hope you are doing well!

For the milling layer, it is a known issue and has been reported to the develop team.

I will keep you updated when we fix this issue.

Regards,

Panpan Fan

Re: problem with custom pads and 3d model sync

anastasov.rosen — Mon, 22 Nov 2021 11:13:35 GMT

Hi @panpan_fan,

thanks for your feedback, hope that AUTODESK team will fix it soon.

Regards

Rosen Anastasov