topic Re: Libraries needs to be re-added every time I restart Fusion 360 in Fusion Electronics Forum

Libraries needs to be re-added every time I restart Fusion 360

j.rognskog — Tue, 08 Feb 2022 08:52:24 GMT

Hi,

I have a electronic design with schematic/pcb and both local libraries (that follows F360) and a managed library (library.io) and team library (which is located in the same folder as the project).

Every time I restart fusion, and opens the project, the library manager shows yellow warning signs on the team libraries, and the managed library always needs to be updated. So, I have to choose "Add from Team" and select the libs every time.

Any hints?

Re: Libraries needs to be re-added every time I restart Fusion 360

jorge_garcia — Tue, 08 Feb 2022 21:00:39 GMT

Hi @j.rognskog,

I hope you're doing well. Could you post a picture of your library in Design tab. Also please confirm the libraries you have to always re-add and the locations you are enabling them from.

Best Regards,

Re: Libraries needs to be re-added every time I restart Fusion 360

j.rognskog — Wed, 09 Feb 2022 07:05:04 GMT

Hi Jorge,

Attached screenshot from library manager (red boxes to mask name/lib).

The local libraries are what followed fusion.

The Sparkfun libraries have been uploaded to the project folder in Fusion (same folder as the project).

The "red" library is a managed library.

If I open one of the sparkfun libraries (just doubleclick on them in the data panel) the yellow warning sign disappears from the library manager. Another way is to re-add them via "Add From Team".

The "red" library always says there is a new version, and I have to update every time.

These things do not get saved no matter what I do, even if I do a small change in the pcb/schematic and save, they still reappear like this.

Thanks

Re: Libraries needs to be re-added every time I restart Fusion 360

deanfranks — Wed, 09 Feb 2022 22:35:19 GMT

I'm having the same issue.

I have designs in /ECAD/ProjectFolder and libraries in \ECAD_Library

Every time I reload fusion, all the libraries referenced from my "team" directory are absent from the Add dialog and show up as Unavailable with the yellow caution triangle in the library manager. Re-adding the folders resolves the problem for the current session.

Design and libraries worked fine in previous Fusion updates.

Re: Libraries needs to be re-added every time I restart Fusion 360

deanfranks — Wed, 09 Feb 2022 22:38:38 GMT

FYI - the library also does not show up in the Available tab of the library manager, Add From Team is required to get the library reloaded.

Re: Libraries needs to be re-added every time I restart Fusion 360

j.rognskog — Mon, 14 Feb 2022 09:31:20 GMT

Hi Jorge,

Any news on this?