topic Design with adjustement clearance in Fusion Design, Validate & Document Forum

Design with adjustement clearance

sterfield — Wed, 28 Oct 2020 18:52:59 GMT

Hey folks,

Quick question : how do you design correctly an adjustement clearance between parts ?

Let’s say you want to have two parts linked together with finger joints, and you want 0.1mm between the joints. You can create one part and offset 0.1 mm in the sketch, then extrude the two parts.

I also saw that you can create both parts with no clearance, then use the "offset face" tool to create the clearance.

Is there any other ways to do (efficiently) this ?

Thanks !

Re: Design with adjustement clearance

TheCADWhisperer — Wed, 28 Oct 2020 20:19:18 GMT

You might create a named Parameter (or several standard) for sketch dimensions and features.

Re: Design with adjustement clearance

sterfield — Thu, 29 Oct 2020 16:31:11 GMT

Yes, having a named parameter is definitely the way to go, in order to have all the clearance bound to the same value.

But it means that you have to define manually in your sketches or in your components the place where the clearance exists. I was hoping there was some tools / methods to simplify this process, but I guess not.

Thanks for the answer !