https://forums.autodesk.com/t5/fusion-design-validate-document/trouble-with-offset-work-plane/m-p/9848874#M97666 <P>yes, that is a current limitation in Fusion parametric designs - you cannot Move a work plane (or axis, or point) after creation.&nbsp; That may be implemented some day, but for now all you can do is to edit the definition of the plane (change the offset value)</P> Thu, 05 Nov 2020 20:46:41 GMT jeff_strater 2020-11-05T20:46:41Z https://forums.autodesk.com/t5/fusion-design-validate-document/trouble-with-offset-work-plane/m-p/9848828#M97665 <P>I'm new to Fusion360 i have a wing rib and I am trying to setup an offset work plane at an angle of 30deg to the face of the rib, i create the offset plane but when i click on it and hit m for move it doesn't give me the option to move or rotate it, the move menu pops up but i cant click on the plane to move it. I tried a different approach i click on it and hit edit feature but then&nbsp; can only move it in 1 direction. Any suggestions?</P> Thu, 05 Nov 2020 20:24:51 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/trouble-with-offset-work-plane/m-p/9848828#M97665 Anonymous 2020-11-05T20:24:51Z https://forums.autodesk.com/t5/fusion-design-validate-document/trouble-with-offset-work-plane/m-p/9848874#M97666 <P>yes, that is a current limitation in Fusion parametric designs - you cannot Move a work plane (or axis, or point) after creation.&nbsp; That may be implemented some day, but for now all you can do is to edit the definition of the plane (change the offset value)</P> Thu, 05 Nov 2020 20:46:41 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/trouble-with-offset-work-plane/m-p/9848874#M97666 jeff_strater 2020-11-05T20:46:41Z