topic Fusion Drawings: Dimension rounding down in Fusion Design, Validate & Document Forum

Fusion Drawings: Dimension rounding down

schonp — Thu, 10 Dec 2020 14:34:41 GMT

Hi,

I'm working on a drawing. I've added a dimension that reads .325". I've changed the precision to 2 digits and it now reads .32". Is there a setting somewhere that rounds down instead of up?

I should mention that I have a second drawing file open with a variation of the same part. In this part when the .325" dimension precision is changed to 2 digits it rounds up to .33".

Any thoughts?

Thanks - peter

Re: Fusion Drawings: Dimension rounding down

g-andresen — Thu, 10 Dec 2020 16:21:05 GMT

Hi,

change your settings

günther

Re: Fusion Drawings: Dimension rounding down

etfrench — Thu, 10 Dec 2020 22:46:10 GMT

Both rounding results are accurate for the two digit tolerance. Why would you set the decimal place smaller than the actual value's decimal place.

p.s. Change your decimal place setting in Preferences to the max digits and verify the values in both files are identical.