Design Issue :: Creating a pocket with compound angles

nathanhein — Fri, 25 Dec 2020 16:15:42 GMT

Issue: I need to make a pocket that involves multiple angles. I can draw this as a 3d sketch, but I do not understand how to turn it into a body/solid. I am assuming at this point I am going about this all wrong.

Screenshot below. On the right is my 3d drawing to correct dimensions. On the right is the mesh model turned into a body of the Thiniverse part which my 3d sketch is based on (to ensure my pocket's dimensions are correct) . I have also attached the fusion file.

Background: I am making a new mounting plate for a quick adapter from Thingiverse. This part will be 3d printed.

Thank you for your help. This has been plaguing me for a couple weeks now and all my tinkering and Youtube tutorial watching watching have not gotten me far.

Re: Design Issue :: Creating a pocket with compound angles

g-andresen — Fri, 25 Dec 2020 17:41:33 GMT

Hi,

1. activate design history

2. 1 sketch on one plane

Screencast

günther

Re: Design Issue :: Creating a pocket with compound angles

TheCADWhisperer — Fri, 25 Dec 2020 18:18:34 GMT

See Attached. (Caution: Check my units.)

topic Design Issue :: Creating a pocket with compound angles in Fusion Design, Validate & Document Forum

Design Issue :: Creating a pocket with compound angles

Re: Design Issue :: Creating a pocket with compound angles

Re: Design Issue :: Creating a pocket with compound angles