https://forums.autodesk.com/t5/fusion-design-validate-document/extra-line-in-design-and-slicing-issues/m-p/9964774#M94313 <P>I am brand new but i've made a simple design with a cylinder as shown in the picture which I believe is preventing me from getting the body constrained.&nbsp; i somehow created an extra line and for the life of me i cannot remove it. .&nbsp; its only on the inside and when i slice the file the results are also shown in the picture.&nbsp; I can't tell if this is a result of the line of something else in the model but the model itself looks good-other than the line.&nbsp; this might be 2 separate issues but i wanted to see if this was an obvious oversight that could be easily corrected with a little guidance.&nbsp; Im happy to provide any additional technical information but i also wasn't sure of the relevant other than the wall thickness is 1mm&nbsp; Thank you</P> Mon, 28 Dec 2020 03:46:50 GMT brian.davidson43788 2020-12-28T03:46:50Z https://forums.autodesk.com/t5/fusion-design-validate-document/extra-line-in-design-and-slicing-issues/m-p/9964774#M94313 <P>I am brand new but i've made a simple design with a cylinder as shown in the picture which I believe is preventing me from getting the body constrained.&nbsp; i somehow created an extra line and for the life of me i cannot remove it. .&nbsp; its only on the inside and when i slice the file the results are also shown in the picture.&nbsp; I can't tell if this is a result of the line of something else in the model but the model itself looks good-other than the line.&nbsp; this might be 2 separate issues but i wanted to see if this was an obvious oversight that could be easily corrected with a little guidance.&nbsp; Im happy to provide any additional technical information but i also wasn't sure of the relevant other than the wall thickness is 1mm&nbsp; Thank you</P> Mon, 28 Dec 2020 03:46:50 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/extra-line-in-design-and-slicing-issues/m-p/9964774#M94313 brian.davidson43788 2020-12-28T03:46:50Z https://forums.autodesk.com/t5/fusion-design-validate-document/extra-line-in-design-and-slicing-issues/m-p/9964781#M94314 <P>I have found the issue with the line, it was somehow part of an extrude process earlier in the model and i have corrected it.&nbsp; any ideas on how the slicing could be this way?</P> Mon, 28 Dec 2020 03:58:01 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/extra-line-in-design-and-slicing-issues/m-p/9964781#M94314 brian.davidson43788 2020-12-28T03:58:01Z https://forums.autodesk.com/t5/fusion-design-validate-document/extra-line-in-design-and-slicing-issues/m-p/9964817#M94315 <P>I was able to fix both issues, the gaps in the slicing was from not havintg the bodies aligned properly so once i selected them both and chose align they snapped where i wanted and i was able to slice perfectly.&nbsp;</P> Mon, 28 Dec 2020 04:51:33 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/extra-line-in-design-and-slicing-issues/m-p/9964817#M94315 brian.davidson43788 2020-12-28T04:51:33Z