topic Re: Help me to create a wave panel in Fusion Design, Validate & Document Forum

Help me to create a wave panel

valentynchikin — Wed, 27 Jan 2021 18:34:20 GMT

Good Day everyone.

I am new to Fusion 360 and I struggle to reproduce a following pattern in my project.

Any tips would be very appreciated!

Thank you!

Re: Help me to create a wave panel

g-andresen — Wed, 27 Jan 2021 18:41:27 GMT

Hi,

watch this tutorial by @TrippyLighting

günther

Re: Help me to create a wave panel

valentynchikin — Wed, 27 Jan 2021 18:59:03 GMT

Thank you very much for your reply!

I have already studied above mentioned tutorial, but I could not implement the same technic in my case. In my example there are wave parts that are incomplete and surface could not be done. So either this technic could not be used or I just lack of skills ((

Re: Help me to create a wave panel

JHRendon — Wed, 27 Jan 2021 20:02:14 GMT

Hi! Tthis video can help you. Maybe you can download that texture from Mudbox or make it in Mudbox software. There is really easy.

https://www.youtube.com/watch?v=yV8cOjNYnLY

Re: Help me to create a wave panel

TrippyLighting — Wed, 27 Jan 2021 20:36:01 GMT

@valentynchikin wrote:

Thank you very much for your reply!

I have already studied above mentioned tutorial, but I could not implement the same technic in my case. In my example there are wave parts that are incomplete and surface could not be done. So either this technic could not be used or I just lack of skills ((

That technique can be used. It is a bit more involved, but it is possible.

However, This can also is done with T-Splines.

Let me know if the attached model with what you see in the image above helps.

The techniques @JHRendon linked to can also be very powerful. I'd use Blender as it is free, open-source software.

Re: Help me to create a wave panel

valentynchikin — Wed, 27 Jan 2021 20:49:46 GMT

@TrippyLighting wrote:
@valentynchikin wrote:
Thank you very much for your reply!

I have already studied above mentioned tutorial, but I could not implement the same technic in my case. In my example there are wave parts that are incomplete and surface could not be done. So either this technic could not be used or I just lack of skills ((
That technique can be used. It is a bit more involved, but it is possible.
However, This can also is done with T-Splines.

Let me know if the attached model with what you see in the image above helps.

The techniques @JHRendon linked to can also be very powerful. I'd use Blender as it is free, open-source software.

@TrippyLighting

Thank you very much! This was really helpful and the issue is now solved!

Re: Help me to create a wave panel

g-andresen — Thu, 28 Jan 2021 12:40:53 GMT

Hi,

if you are interested in wave panels, you might also be interested in the development of modulated curves.

However, with this application you can "only" generate toolpaths for such panels, but not 3-D models for further use in applications.
The panels can be created individually in desired sizes for seamless joining.

günther

Re: Help me to create a wave panel

valentynchikin — Thu, 28 Jan 2021 13:16:32 GMT

To: @g-andresen

Thank you for your answer, I will definitely check this out!

Re: Help me to create a wave panel

TrippyLighting — Thu, 28 Jan 2021 13:22:18 GMT

@g-andresen That is very cool! Thanks for sharing!