topic Re: Removing appearance temporary in Fusion Design, Validate & Document Forum

Removing appearance temporary

ari.hemila — Thu, 04 Feb 2021 06:25:38 GMT

Hi guys, I have a component that I added several colors to the faces. Is there a way to temporarily disable the appearance ?

Re: Removing appearance temporary

JHRendon — Thu, 04 Feb 2021 07:10:06 GMT

Unffornatuly you can't disable the appearance, but you can add another appearance. So if you want to re-assign the appearance you should select those faces and give the specific appearance to each face. If several faces have the same appearance I recommend you to make a "selection set"
Then when you want to give it the appearance you want you skip to select face by face, only the set you want the same appearance .

so you can select tha faces of each appearace, and when you want to give it the last appearance you skip the select face by face, only the set you want the same apperance .

Another tool you can use is "component color cycling toggle"

So it has a description what it does.

Re: Removing appearance temporary

ari.hemila — Thu, 04 Feb 2021 07:28:40 GMT

Thank you for the quick answer. I think the solution for me is the "component color cycling toggle", as my basic problems was to see sketch on a black surface.

Re: Removing appearance temporary

JHRendon — Thu, 04 Feb 2021 07:44:55 GMT

Ooohh ok. I suppose you have a define sketch in a black surface

so another option could be change the enviroment

dark sky makes the define sketch white.

Re: Removing appearance temporary

ari.hemila — Thu, 04 Feb 2021 07:50:13 GMT

Great, that's another solution, thanks again 🙂

Re: Removing appearance temporary

shahriarsifat1802164 — Thu, 04 Feb 2021 08:47:25 GMT

Actually, you can not temporarily hide the apperance.
Thank you.

Re: Removing appearance temporary

g-andresen — Thu, 04 Feb 2021 10:16:57 GMT

Hi,

try this workaound

günther