topic Re: sheetmetal normal cut in Fusion Design, Validate & Document Forum

sheetmetal normal cut

Anonymous — Wed, 17 Feb 2021 09:27:58 GMT

is it possible to do cuts on sheetmetal that are normal to the sheetmetal? the laser cutter isnt able to cut under an angle.

g-andresen — Wed, 17 Feb 2021 09:31:55 GMT

Hi,

Please share the file and show what you are talking about.

File > export > save as f3d on local device > attach it to the next post

günther

Anonymous — Wed, 17 Feb 2021 10:38:04 GMT

see attachment

g-andresen — Wed, 17 Feb 2021 10:48:35 GMT

Hi,

To my knowledge, the laser cut is made on the flat pattern and is therefore normal to surface.

günther

TheCADWhisperer — Wed, 17 Feb 2021 13:43:37 GMT

@Anonymous

Do you want the real solution?

Anonymous — Wed, 17 Feb 2021 13:40:20 GMT

if you know a solution that requires less steps, let me know!

TheCADWhisperer — Wed, 17 Feb 2021 13:53:46 GMT

Less than two steps?

TheCADWhisperer — Wed, 17 Feb 2021 15:05:39 GMT

@Anonymous

OK, I was able to get it down to one sketch...