topic Re: Patterns in Fusion Design, Validate & Document Forum

Patterns

Anonymous — Thu, 18 Feb 2021 21:27:55 GMT

Im been testing fusion 360 for about a week so im really new to this 3D drawing world, im stuck at this problem.

Im trying to make a pattern to my model looking like this(picture) but I cant seem to figure out how.

Re: Patterns

etfrench — Thu, 18 Feb 2021 22:22:47 GMT

The first step is to attach your file to the thread 😀 (File/Export/Archive file *.f3d)

Re: Patterns

shahriarsifat1802164 — Fri, 19 Feb 2021 03:59:01 GMT

Hi,
You need to select a pattern along path.
go to create >> pattern >> pattern along path

Re: Patterns

shahriarsifat1802164 — Fri, 19 Feb 2021 03:59:43 GMT

Thank you.

Re: Patterns

TrippyLighting — Fri, 19 Feb 2021 07:10:04 GMT

And that resembles the pattern in the image ?

Re: Patterns

Anonymous — Fri, 19 Feb 2021 09:30:18 GMT

Not the holes, the grip on the handle

Re: Patterns

Anonymous — Fri, 19 Feb 2021 09:33:32 GMT

Could not edit my post so I post it here

Re: Patterns

shahriarsifat1802164 — Fri, 19 Feb 2021 10:21:26 GMT

You need to thicken your model

Then cut the same shape you have provided on that image and then pattern that feature either linear pattern or pattern along path.

Thank you.

Re: Patterns

TrippyLighting — Fri, 19 Feb 2021 11:38:32 GMT

My first concern is that you have the timeline turned off. For beginners, this is not recommended.

My second concern is that your sketches are not fully defined (constrained and dimensioned).

@shahriarsifat1802164 can you demonstrate what you are suggesting? I think as so often you have misunderstood the question. Completely!

Re: Patterns

TheCADWhisperer — Fri, 19 Feb 2021 13:49:18 GMT

Robust Modeling Strategies

Re: Patterns

Anonymous — Fri, 19 Feb 2021 13:56:02 GMT

the Circels in the sketch has no funktion, they are just there so I know where to make the counterbore holes later on

Re: Patterns

g-andresen — Fri, 19 Feb 2021 14:40:35 GMT

Hi,

here is one possible way.

günther

Re: Patterns

Anonymous — Fri, 19 Feb 2021 16:20:04 GMT

your on to something there

Re: Patterns

TheCADWhisperer — Fri, 19 Feb 2021 16:28:30 GMT

@Anonymous wrote:
the Circels in the sketch has no funktion, they are just there so I know where to make the counterbore holes later on

Then the most certainly do have a function.

This does not change anything that I wrote.

Re: Patterns

g-andresen — Fri, 19 Feb 2021 16:45:21 GMT

Hi,

Version 2

günther

Re: Patterns

laughingcreek — Fri, 19 Feb 2021 18:36:20 GMT

what the heck, here's my go at it-

Re: Patterns

Anonymous — Fri, 19 Feb 2021 20:20:14 GMT

wow thats awesome! Your a genius! opend the file and was so eazy, thanks alot 🙂