topic Re: Need help with loft for vizor in Fusion Design, Validate & Document Forum

Need help with loft for vizor

filip.kolinsky — Mon, 08 Mar 2021 02:20:54 GMT

Hello, its 3 in the morning and I had the wonderful idea of doing some modeling work. The thing that Im stuck on is making the vizor. Basically i need the blue ark to follow the purple lines from sketch 13 and 14. However after like half hour of trying Im still unable to do it. Could someone explain it what is wrong and show me how to repair it? Thank you.

Re: Need help with loft for vizor

davebYYPCU — Mon, 08 Mar 2021 03:43:31 GMT

You have some decisions to make.

Your sketches overlap in the corner and causes intersecting errors.

I would use the overlapping curves for the visor but you have corner interference for them and the rail does not reach them.

Can make a loft that is incomplete with the body edge and rail, but I don't think you want that either.

Might help

Re: Need help with loft for vizor

filip.kolinsky — Mon, 08 Mar 2021 16:38:20 GMT

Thanks. Basically what I ended up doing is I created the same model but better with parameters and i was able to do the loft after a bit of struggle coz i "switched" the rail and the two shapes. But after that I ended up with great result. Printing the first parts now but im sure the prototyping is not over yet.