Generative design failed- Geometry Regions Separated

Anonymous — Mon, 05 Apr 2021 08:04:40 GMT

Hi, I have been trying to use the generative design function in Fusion 360 for a module load study.

It would work on the first case when the module is stacked vertically, however when I changed the shape, the error i get is that the geometry regions have separated and the outcome is just 1 or 2 iterations before it stopped.

https://forums.autodesk.com/t5/fusion-360-design-validate/generative-design-study-fail-geometry-regions-separated/td-p/8158314,

From what I understand in the above forum post, all the modules should have a load applied to it but this should be the case in this load study and works for the previous vertical test.

I shared the file link below, hope someone can help with this problem, thank you.

https://a360.co/2PWBfIG

Re: Generative design failed- Geometry Regions Separated

Anonymous — Tue, 01 Jun 2021 16:12:59 GMT

Hi @Anonymous ,

I checked your file shared through link. In Structural Study 1 you have applied multiple load of 1100 N while in Structural Study 3 you have applied only one load case of 2200 N. Looks like it is creating the issue. You need to apply other loads in Study 3.

Thank you.

topic Generative design failed- Geometry Regions Separated in Fusion Design, Validate & Document Forum

Generative design failed- Geometry Regions Separated

Re: Generative design failed- Geometry Regions Separated