topic Re: How to fill in lines? in Fusion Design, Validate & Document Forum

How to fill in lines?

jamesliu87878 — Thu, 22 Apr 2021 17:22:49 GMT

(Complete Beginner) How do I fill in between lines to create a solid shape? I've tried searching everywhere but just can't find an answer

I'm trying to fill in the space between the blue lines. All of the dots are connected.

Thanks.

Re: How to fill in lines?

jeff_strater — Thu, 22 Apr 2021 17:27:28 GMT

we would need to see the design to be certain, can you share it here? One first check: In the sketch, do you have "Show Profile" turned on?

Re: How to fill in lines?

jamesliu87878 — Thu, 22 Apr 2021 17:52:08 GMT

I've got show profile turned on and all the other options are the same as the image above except for snap, which is turned on.

I tried generating a link but all it shows is a single portion of the design and nothing else

There's not much to share anyways because currently it's only a 2d image on a canvas and a sketch of some lines over it. But I attached a copy of the design.

Re: How to fill in lines?

jeff_strater — Thu, 22 Apr 2021 17:57:39 GMT

Thanks for the design. The problem is in the upper right corner - you have a few small curves which are construction curves. Zoom in, make those "normal", and things should be OK

Re: How to fill in lines?

HughesTooling — Thu, 22 Apr 2021 17:58:33 GMT

For some reason you have a couple of curves set to construction. Select them and press X to change to normal and you get a profile.

Re: How to fill in lines?

jamesliu87878 — Thu, 22 Apr 2021 18:02:48 GMT

Ah ok,

Thanks!