topic Re: section analysis: cross hatch makes design look not straight in Fusion Design, Validate & Document Forum

section analysis: cross hatch makes design look not straight

troyostrander — Thu, 13 May 2021 10:11:19 GMT

Is there any way to turn off the cross hatch in section analysis?

The section analysis is a great tool and I am using it all the time but the optical illusion that the cross hatching makes is driving me crazy. This blue shaded component looks a couple degrees off but it's NOT!

Do you see it also?

Check out the attached screencast.

Re: section analysis: cross hatch makes design look not straight

g-andresen — Thu, 13 May 2021 10:18:29 GMT

Hi,

please share the file so we can check the design, especially the planes

günther

Re: section analysis: cross hatch makes design look not straight

troyostrander — Thu, 13 May 2021 10:20:02 GMT

Its totally 0 degs....It is the optical illusion of the cross hatch

Re: section analysis: cross hatch makes design look not straight

troyostrander — Thu, 13 May 2021 10:21:07 GMT

Here is the screencast:

https://autode.sk/3hoS6Qe

Re: section analysis: cross hatch makes design look not straight

g-andresen — Thu, 13 May 2021 10:25:02 GMT

Hi,

Without an insight into the design, comments and advice are not possible.

günther

Re: section analysis: cross hatch makes design look not straight

troyostrander — Thu, 13 May 2021 10:33:46 GMT

Blue section sketch is horizontally constrained:

Re: section analysis: cross hatch makes design look not straight

Phil.E — Thu, 13 May 2021 15:49:18 GMT